03 - 6411 6437 inquiry@igesb.com

Supply Marine Equipment

alarm-starter

 

 

 

 

 

 

 

 

 

 

 

Alarm Panel (using PLC)

PLC System

  • use siemens logo micrologix
  • programming plc for 15 output

Alarm monitor use window light

  • 15 units window display for monitor
  • 1 unit for acknowledge, lamp test, dimmer & reset button
  • 2 units selector auto / off / manual for pump

Equipment and wiring

  • mcb for the “on/off” system
  • terminal block for connection
  • 1 unit buzzer for alarm
  • 1 lot workmanship & tool for installation
  • 1 lot name plate
  • plate for the alarm monitor (size: 250mm x 250mm)
  • plate for the control and termination (size: 400mm x 450mm)
starter

 

 

 

 

 

 

 

 

 

 

 

Starter Panel

Starter Ventilation Fan

– Forward /reverse rotation

Starter Fuel Oil Transfer Pump

– To auto start when the low level switch is activated and to

auto stop when high level switch is activated.

Starter Bilge and Ballast Pump (with prima pump)

Starter Fresh water and Sea water pressure set.

cctv-vertical
  • Lcd monitor 19” wide screen (samsung)
  • Tender (ip 68 dust & water proof infrard camera)
    model :- ir35sn
    1/3” Sony had ccd sensor
    storage temp.       -20 tp -/+ 70°c
    operation temp.     -20 tp -/+ 60°c
  • I unit dvr
    multiple & flaxible operation control :-
    mouse, ir remote controller, usb pendrive backup &
    80gb hdd in build
  • Accessories (bcn plug) for cctv
aft-console
AFT CONSOLE

 

 

AFT Console panel (2418mm W) x (834mm D) x (1374mm H)complete set.

  • Material : 2mm thick.e.g.sheet
  • The design follow as per drawing given
  • Finishing: powder coated paint
  • The wiring of component on the drop in panel will be terminal into terminal block
  • Inside panel with complete with wire ducting and din rail for mounting equipment and wiring

ecr-console
ECR CONSOLE

 

 

Fwd console panel (1600mm W) x (883mm D) x (1129mm H) complete set.

  • Material : 2mm thick.e.g.sheet
  • The design follow as per drawing given
  • Finishing: powder coated paint
  • The wiring of component on the drop in panel will be terminal into terminal block
  • Inside panel with complete with wire ducting and din rail for mounting equipment and wiring

overhead-console
OVERHEAD CONSOLE

 

 

Overhead console panel (1241mm W) x (359mm D) x (385mmH)  complete set.

  • Material : 2mm thick.e.g.sheet
  • The design follow as per drawing given
  • Finishing: powder coated paint
  • The wiring of component on the drop in panel will be terminal into terminal block
  • Inside panel with complete with wire ducting and din rail for mounting equipment and wiring.
alarm-monitoring
ALARM MONITORING TOUCH SCREEN

 

Panel (250mm W) x (120mm D) x  (300mm H)  complete set.

  • Material : 2mm thick.e.g.sheet
  • The design follow as per drawing given
  • Allen Bradley – PanelViewPlus600 connected to Allen Bradley – MicroLogix1100 PLC
  • Indicate bow thruster pump run, steering gear pump run, tank alarm, bilge alarm and door alarm.
airflied-lightning-control 

Console panel (500mm W) x (300mm D) x  (600mm H) complete set.

  • Material : 2mm thick.e.g.sheet
  • The design follow as per drawing given
  • Finishing: powder coated paint
  • The wiring of component on the drop in panel will be terminal into terminal block
  • Inside panel with complete with wire ducting and din rail for mounting equipment and wiring